Immersion RC Vortex 250 PRO - D W-P Enterprises LTD - 2
Click to enlarge

In Stock!

Immersion RC Vortex 250 PRO

Vendor: Immersion RC
Real Time 4 Visitor Right Now

Product Type: Racing Drone

Requires a CPPM compatible receiver.

The Vortex 250 is an FPV Racing quadcopter  by ImmersionRC. They have taken all of the consumer feedback from the original Vortex and used it to make a range of changes and improvements to the Motors, ESC's, Flight controller and many more..

Just like the original Vortex the Vortex 250 PRO is ARF. It comes fully build and only requires compatible radio gear, a battery and you are ready to go. A protective zipper case is also included

Pure-bred Racer

The Vortex 285’s foldable tubular arms are replaced with virtually unbreakable 4mm Carbon Fiber flat arms, with twelve M3 aluminium spacers wrapped in custom plastic.
The frame is designed to hit objects which don’t like to move out of the way, and survive to fly again in the next race.
The 2mm Carbon Fiber top-plate is designed to take some serious abuse, backed up by 2mm FR4 skid plates which survive scraping across the occasional parking-lot floor.

Fusion Gen2 Flight Controller

The ImmersionRC Fusion, a highly integrated state-of-the-art flight controller, gets an extensive update for the Vortex 250.
The ‘F1’ class processor is updated to an F3, flash memory for BlackBox log storage is integrated, the buzzer is replaced with one MUCH louder, and a port is added for direct serial receiver hookup (5V and 3.3v supply options).
As for the Fusion Gen1, the Gen2 is pre-loaded with a custom build of CleanFlight, and is future-proof, supporting future updates.
The high performance ‘F3’ processor provides > 2x the performance of it’s predecessor, allowing lower loop times, and better flight performance.
PIDs are adjusted on-screen, in easy-to-use menus, driven directly from the R/C Tx.

Gen2’ Custom 32-bit, 20A ESCs, with OneShot125

Custom 20A ESCs (22A Peak), with OneShot125, and regenerative braking, for crisp-responsive flight using CleanFlight. A 32-bit ARM processor runs each ESC, ensuring plenty of processing power to drive even the most fussy brushless motors.
The second generation of ImmersionRC’s ‘EzESC’, with race-proven reliability, and the extra punch required to spin the 2204/2300kV motors.
These ESCs also support our innovative rotorSENSE, which programs prop direction with the flick of a finger. No more swapping motor wires.

Blackbox Recorder

Blackbox is a high speed recorder for flight controller data, which is stored in an integrated flash memory on the Vortex 250’s Fusion Gen2 board. This extremely powerful tool can be used to tweak your PIDs to perfection with your choise of props, battery, and camera.

Flexible Camera Options

The flexible Vortex camera mount supports both a flight cam, and an HD camera such as a GoPro. This mount is included in the box with the Vortex 250, and doesn’t require the purchase of an add-on product. The flight cam is protected from impacts, and is suspended from a vibration-dampened carbon-fibre plate. An adjustable bracket allows the camera to be tilted to ensure a good forward view during high-speed racing.
As the icing on the cake, a monster 3A switching regulator allows any HD cam (GoPro included) to be powered from the flight pack, allowing unnecessary camera batteries to be left at home.

In the Box

  • Vortex 250 PRO Quadcopter
  • Protective Zipper Case
  • FatShark 700TVL FPV Camera
  • NexWaveRF 5.8GHz video transmitter

Required to Run

  • Radio Transmitter
  • CPPM compatible receiver
  • 3-4S LiPo Battery